Standard brake ring for senior players;
Thickening brake ring for all players.
The standard brake ring is about 65% of the braking force of the original cup. The brake can be adjusted more delicately, and it is easy for the bait to reach the limit distance. For example, after the 3rd gear is adjusted to the 4th gear, the increase in the braking force and the distance change will not be noticeable. Not big, but because the peak braking force is not high enough, novices who are not proficient in throwing poles can easily blow the line. We recommend the standard brakes forSenior players;
The thickening brake ring is about 85% of the braking force of the original cup. The stability is very high and it is not easy to break the line. And there is no strong brake fault like the original cup. The braking force curve is smooth and smooth, suitable for long-range shooting and Used in some occasions that require high stability (such as playing competitions etc.) We recommend the thickening brake ring forall players.
For example, DAIWA's two dynamic brake system and fixed brake system:
SV brake system: When the initial speed of the spool reaches the maximum speed, the brake ring moves to close magnet, and achieve the maximum braking force. Due to decreasing speed, the rear brake ring will reset and reduce brake force. At last, prevent backlash to use your thumb to control spool. It is suitable for 5-15 grams lures.
Z brake system: the initial speed, high speed and rear speed of spool are slowly rising and slowly falling, braking force is gentle up and down. It is suitable for 10-30 grams lures of super long cast.
Fixed brake system: Also called original magnetic brake, fixed height of the brake ring. The generated electromagnetic resistance is smoother than the above two brake systems, also the peak value is not high. It is suitable for playing with micro cast. Some baitcasting reels also use fixed brake system as long cast. such as ZPI, Super Cup, etc., performance also very good!
We are highly recommend 80% line capacity of spool, otherwise, it is easy to jam.
Since the spool is relatively thin and highly hollowed out and has a large diameter, it will be clear when the line is taken up, because the sound of line rubbing the line gauge was amplified by the warp cup. It is definitely not the sound of grinding the cup.
The original spool is thicken and heavy, also diameter is small, so there is basically no sound when line passes through the line gauge. Players who mind this “Shashasha” sound should be consider before buy it!
We are now tackle 7178 aluminum technical problems, it may be slight uneven color on our spools, which does not affect the accuracy and use. Perfectionist players should pay attention!